Solderless LED Strip Connectors 10mm for 12V/24V Light Strips (7-Pack)

About this item

• 💡[Application] These 2-pin connectors are suitable for connecting 10mm wide waterproof and non-waterproof 3528/2835 monochrome LED strips. Rated voltage: 0-36V; Rated current: 5A.The connector is suitable for 2 wires of 22 awg.
• 💡[NO SOLDERING REQUIRED] The LED light connector fits seamlessly to the light strip, ensuring that there will be no poor contact or disconnection. Copper clips provide a stable connection to the light strip.
• 💡[Transparent Cover] The LED connector is made of high quality clear crystal with an elegant appearance and no dark areas, which helps the light strip to emit a complete and unobstructed light.
• 💡[Package] 2 Pin 10mm Clear No Gap No Solder LED Strip to Wire Connector 7pcs 15cm 22 AWG Extension Cord + 1x Snap Detector. Only for 10mm wide LED strips, not for 8mm LED strips; If the connection is not successful, you can cut a new section of wire and try to connect again.
• 💡[Note]: Before pressing the connection, pay attention to check whether the positive and negative poles of the strip are the same as the other end, only the correct connection can work properly, the wrong strip will not be able to light up; Compatible with 10MM wide COB LED strips only, not applicable to 8MM board width (or other sizes); Compatible with bare board COB and SMD strips, PCB board width 10MM wide 2PIN Strip, Maximum Current: 6A